| | |  | This is the Conversation Forum for Changing a Flat Tyre in an Emergency
<sigh> >> | |
| | | Subject: A11824184 - Changing a Car's Flat Tyre - Update of A996924
Posted May 17, 2006 by Sea Change
This is a reply to this Posting
| | Posting
2
  | | It's worth noting somewhere that before you start that you should see that you have WD40, a screwdriver, a brick or block of wood, a complete jack, a jackhandle, and a sturdy pipe that fits over the jackhandle. If you don't have these, you'd might as well call a service and save yourself the pain and filth. You might want to go get these for next time. Perhaps put this near the end of the article?
What's a hazard, that you turn one on?
Wheel trim or hubcap off...->Wheel trim or hubcap off of the tire that is flat
Flimsy jack->hmm...how does one know ahead of time that the jack is inadequate to the task? American cars tend to come with a jack already fixed in place around the tire, and there'd be no space there to put a jackstand in, so this is something you'd have to plan for. All the cars I have owned have always had a jack that's strong enough that came with the car.
In any case, it's rather hard to remove the nuts if you haven't already loosened them before lifting the tire, independent of any hazard being run by not doing it. Perhaps emphasize again how hard undoing the nuts is?
Starting at the top one->you mention later on that the order of final tightening matters, but it can help you handle an unwieldy tire if you also do the initial tightening in the same way.
|
| | | Subject: A11824184 - Changing a Car's Flat Tyre - Update of A996924
Posted May 18, 2006 by Thought I should change my name back to 'Mina' to avoid confusion
This is a reply to this Posting
| | Posting
3
| | "It's worth noting somewhere that before you start that you should see that you have WD40, a screwdriver, a brick or block of wood, a complete jack, a jackhandle, and a sturdy pipe that fits over the jackhandle."
Well, most of the time you will be pulling up at the roadside, so won't be able to make sure you have anything.
While it's a good idea to carry around a good number of tools for various maintainence jobs on the car, we're also told not to leave valuables in the car. Having a brand new set of jump leads stolen from my car I know about this! Most cars have a built in home for a jack and wheel brace, anything else would be on view.
The 'flimsy' jack section was part of the original entry, which is part of what I wanted to 'preserve' (the riginal author has been around reasonably recently) while at the same time not really being happy with. In my experience, a trolly jack is what they mean by 'not flimsy' because the jacks that come with the car are fine, they are just a little crap looking when compared with the professionals! Who has space to carry one of those around though?
This is part of the original 'tone' of the entry, should I remove it?
"you mention later on that the order of final tightening matters, but it can help you handle an unwieldy tire if you also do the initial tightening in the same way." I thought I had done that already. The tyre is on, then the nutes are tightened into position, starting at the top.
Other comments changed in the entry. 
|
|  |
| | | Subject: A11824184 - Changing a Car's Flat Tyre - Update of A996924
Posted May 18, 2006 by Sea Change
This is a reply to this Posting
| | Posting
5
| | There's no reason the article has to be limited to "Changing a Car's Flat Tyre Right Now". If the subject is merely "Changing a Car's Flat Tyre", then you can mention that it's a good idea to have extra tools handy just in case you will need them. A recipe may have instructions for bowls, mixers measuring equipment, and ingredients that the chef doesn't have in his kitchen at the exact moment he reads it, but that doesn't make it a bad recipe.
A for making it consistent with the tone of the original, you can put these tools at the end of the article, after the reader has read everything. One of the funny things about changing tires is the exigency of the situation.
Burglary of cars for tools may be very common in the UK. It's never happened to me in California, nor do I really expect it to. Burglars here are into the easily sold things like radios, handicapped placards, and CD players. The cost of these tools (and replacing them, too, if it comes to that) is much less than a tow, or at least it is so here on the west coast of the United States. In any case, burglary isn't the subject of your article, or it wasn't.
How often is one likely to be burgled compared to the chance one's tire will be caught flat?
|
| |
| |
| | | Subject: Update Forum: A11824184 - Changing a Car's Flat Tyre - Update of A996924
Posted Jun 28, 2006 by neongreencat
This is a reply to this Posting
| | Posting
17
| | Great job on this entry!
Just a few little details that I would reccomend.
-break loose the lugnuts while the tyre is firmly on the ground, but do not loosen them more than a turn or two, they will come off easily when the wheel is off the ground if you first break them on solid ground.
-After jacking the tyre off the ground, do the bump test to prove the stability of the jack. Lift the tyre so it is off the ground and give a light tap or bump to the car. If the jack is unstable it will fall onto the (still attached) flat. This is much better than watching the car fall onto the axle, or worse your leg!
-Seat the replacement tyre and fasten the lugs as far as you can by hand. You will fully tighten the lugnuts when the wheel is firm on the ground (don't forget to do this).
Sorry for yammering on but this is a favorite subject of mine...
Again, Great Job. I never knew that a company had used a front wheel emergency brake! (Seems like a good idea since most cable-to-drum rear E-brakes work worth spit!)
|
|
|
   
 
Conversation list
Most of the content on h2g2 is created by h2g2's Researchers, who are members of the public. The views expressed are theirs and unless specifically stated are not those of the BBC. The BBC is not responsible for the content of any external sites referenced. In the event that you consider anything on this page to be in breach of the site's House Rules, please click on the relevant button to alert our Moderation Team. |
Home
